RIVA FLEXY BASE

Description

• medium-acid formula (pH 4);

• excellent adhesion to the nail plate;

• flexible, but not overly soft;

• medium viscosity, does not run, easy to apply.

How to use:

1. Perform a manicure, buff and dehydrate the nail, apply Dehydrator and Ultrabond.

2. Apply a thin layer of transparent FLEXY BASE and cure for 60 seconds.

3. Apply a camouflage base, gel polish, or perform nail strengthening
   (before strengthening, remove the sticky layer from the base layer).

4. Apply the top coat and cure for 90 seconds.

Precautions: for professional use only.

Important notes:

• has European quality certificates;

• the product is registered in the CPNP system;

• intended exclusively for professional use;

• all RIVA products are not tested on animals;

• carefully read the instructions for use before application;

• the shade of the product in photos may slightly differ from the actual color due to lighting, color rendering, and screen settings;

• the manufacturer may change the composition to improve the formula. The current list of ingredients is always indicated on the packaging;

• if you have allergies or individual intolerance to any of the components, use of the product is prohibited. In such cases, it is recommended to consult a doctor before use.

Attention: the base is intended only as a base layer and is not suitable for leveling.
(All medium- and high-acid bases must not be applied in a medium layer, as this may cause chemical burns.)

Storage Conditions

RIVA products should be stored in their tightly closed original packaging in a cool, dry place, away from heat sources and direct sunlight.

• Do not store bottles or jars in direct sunlight.
• Keep products away from windows, lamps, UV/LED equipment, and other sources of ultraviolet radiation.
• RIVA materials are light-curing products and must be stored under appropriate conditions.

Important

Improper storage, especially prolonged exposure to sunlight or UV/LED radiation, may result in:

• partial or complete curing of the product inside the package;
• changes in product consistency;
• formation of lumps;
• hardening of the material.

⚠️ Such changes are caused by improper storage and are not considered manufacturing defects.